Storage conditions

+ Store in a cool, well-ventilated place.

+ Keep container tightly closed.

+ The floor of the storage area must be impermeable to prevent liquid leaks.

Suitable packaging 

+ Do not use steel containers.

+ Suitable solvent (water, lacquer thinner)

+ Buckets for soaking parts and dumping waste

+ Rags or paper towels

+ Cleaning brushes and picks

+ Dismantling spanner

+ Gun lubricant

+ Safety glasses

+ Rubber gloves

1. Empty the material from your bucket

2. Use a cloth soaked in solvent to remove any residue from inside the cup.

3. Remove the filter from the base of the sample tube.

4. Half fill the cup with the appropriate solvent - tighten the lid and rotate it.

5. Attach your gun to the hose and turbine and spray the solvent into a waste bucket or clean cloth.

6. repeat and spray until the solvent is clean.

PLEASE NOTE that you should never use a wire brush or any metal object to clean your gun. This is likely to cause damage.